The surface must be clean before use. Apply Primer 1200 on a single coat and allow to dry for up to 6 hours. Apply Klondike Ferro and let dry for 8 hours. After drying, dip a sponge in the Soluzione Ossidante and apply one coat to the surface. Allow material to soak for 3 hours. After evenly distribute the second layer and leave to dry for 48 hours. After 48 hours, apply Finish V16 protective varnish in two layers on the surface at intervals of 2 hours. Protective varnish prevents the oxidation process and protects the surface from water and dirt. If the varnish does not spread on the surface, the oxidation process will continue.Dry time 8 hours at a temperature of + 20 ° С and relative humidity of air of 65%