Apply a coat of METEORE 8 gradually over a surface of approx. 1 - 2 m2. Use the PV 43 Trowel and apply 10 - 15 cm long irregular strokes in all directions. While METEORE 8 is still wet, create semi-smooth relief and striped spatula strokes using the PV 43 Trowel, with 5 - 10 cm long strokes in all directions. After about 4 hours at 20°C smoothen with 220 / 260- grit sandpaper to remove any irregular clots and joints. Subsequently apply two different-coloured coats of LAME’. Between the first and second coat of LAME’, wait at least 2 hours at 20°C. LAME’ must also be applied with the PV 43 Trowel in all directions, leaving very little product on the surface. Drying time 6-8 hours at a temperature of + 20 ° С and relative humidity of air of 65%.